General Safety Instructions
Before installation or maintenance, read all safety information carefully. Failure to follow these instructions can result in serious injury or equipment damage.
Only qualified personnel trained in electrical and industrial equipment should install or service FactoryCore™.
Keep the manual accessible near the device for quick reference.
Always follow local regulations and standards for industrial electrical installations.
Warning Callouts
WARNING: Electrical Shock Hazard
Disconnect all power sources before opening the device or performing wiring to avoid electrical shock.
Ensure the device is properly grounded.
WARNING: Risk of Equipment Damage
Do not connect power supply voltages exceeding 24V DC ±10%. Overvoltage can cause permanent damage.
Use recommended fuses and circuit protection devices.
WARNING: Heat Dissipation Required
Maintain at least 50 mm clearance on all sides of the unit for proper ventilation. Avoid installation near heat sources or in enclosed spaces without airflow.
WARNING: Static Electricity Sensitivity
Handle the device with anti-static precautions to prevent ESD damage. Use wrist straps and grounded mats during installation.
Personal Protective Equipment (PPE)
Wear insulated gloves when handling live wiring.
Use safety glasses to protect eyes during mechanical installation or wire stripping.
Wear safety shoes in the installation environment.
Environmental Safety
The FactoryCore™ is rated IP20; it is not waterproof. Do not install in wet or dusty environments.
Ambient temperature range: -20°C to 60°C; avoid exposure to extreme temperatures.
Avoid exposure to corrosive gases or chemicals.
Emergency Procedures
In case of electrical fire, use a Class C or CO2 fire extinguisher—do not use water.
If a fault causes smoke or unusual smells, disconnect power immediately and contact support.
Additional Best Practices
Label all wiring clearly to prevent confusion during maintenance.
Use cable management systems to prevent strain on connectors.
Keep the installation area clean and free of obstructions.
