Mounting Instructions
Attach the DIN rail mounting clip securely to the back of the FactoryCore unit.
Mount the unit on a standard 35 mm DIN rail inside the control cabinet or panel.
Maintain a minimum clearance of 50 mm (2 inches) on all sides of the unit for ventilation and heat dissipation.
Avoid mounting near high-vibration equipment to prevent mechanical stress on connectors and internal components.
Tip: Ensure the clip is fully snapped in place before mounting to prevent the unit from loosening.
Panel Layout and Environmental Considerations
Install the unit in a dry, dust-free environment within the control panel.
Position FactoryCore away from direct sunlight or heat sources such as transformers or power supplies.
If multiple units are installed side-by-side, ensure at least 20 mm spacing between units to maintain airflow.
Use cable ducts or trays to organize wiring and avoid strain on connectors.
Mounting Weight and Handling
FactoryCore unit weight: approximately 1.8 kg (4 lbs).
Use appropriate lifting techniques when handling multiple units or heavy control panels.
Avoid dropping or striking the device during installation.